姿控发动机布局方式优化分析

在液体推进剂动力系统质量模型的基础上,针对采用双组元推进剂和挤压式输送系统的小推力空间飞行器姿控发动机,在控制总冲量和总冲量矩相同的情况下,对动力系统总质量最轻的姿控发动机最优布局方式进行了优化分析     

独立分量分析在液体火箭发动机故障检测中的应用

针对液体火箭发动机试车中,因噪声干扰、不同源信号之间的混叠而造成的信号信噪比低、信号分析和特征提取难度大的问题,提出采用独立分量分析(ICA)法对液体火箭发动机试车信号进行分离,以提高信号的信噪比,并能实时反映各子系统工作过程,为数据分析、特征提取和故障检测与诊断提供可靠的信号。通过对某型液体火箭发动机热试车压强信号进行实例分析,验证了该方法的有效性。     

推进剂利用系统装订参数计算及软件集成方法

在大型航天软件中,推进剂利用系统装订参数计算对提高推进剂利用率具有重要意义。给出了利用系统装订参数的计算方法,并在基于CORBA的分布式大型软件系统中对软件集成方法进行了研究。     

基于模糊模型的发动机部件级故障隔离方法研究

发动机故障诊断与故障隔离是发动机健康监控领域的一大难题,但对发动机故障定位、预防灾难性事故发生及发动机维修意义重大。为了准确地确定故障发生的部位,本文针对某型液体火箭发动机,提出一种基于模糊模型的部件级故障隔离方法。首先对发动机系统进行部件的划分,然后建立各个部件的模糊模型并进行训练,最后按照设定的故障检测与隔离策略对故障进行诊断。利用两组发动机故障仿真数据对基于模糊模型部件级故障隔离方法进行验证,结果表明:本方法可以实现单一或多个部件故障隔离。     

围压下固体推进剂的破坏机理分析

贴壁浇筑的固体发动机推进剂药柱在点火状态下处于三向围压状态,而环向承受拉应变,亟待对围压下推进剂的破坏机理展开研究。基于自研的围压加载试验系统,通过开展推进剂在不同围压、温度和应变率下的单轴拉伸试验来研究围压、温度和应变率的耦合作用对推进剂力学行为的影响。针对围压下推进剂的力学响应特征,通过细观力学仿真进一步研究围压下推进剂的破坏形式,同时借助电镜扫描试验分析推进剂试样断面的形貌特征,通过试验和仿真相结合的手段分析了围压下推进剂的破坏机理。研究结果表明,围压下推进剂的损伤界面显著减少,且随着围压载荷的逐渐增加,推进剂的损伤形式从以颗粒脱湿为主转变为以颗粒破碎为主。     

Controllable combustion behaviors of the laser-controlled solid propellant

Microsatellites have been widely applied in the fields of communication,remote sensing,navigation and science exploration due to its characteristics of low cost,flexible launch mode and short development period.However,conventional solid-propellant have difficulties in starting and interrupting combustion because combustion is autonomously sustained after ignition.Herein,we proposed a new type of solid-propellant named laser-controlled solid propellant,which is sensitive to laser irradiation and can be started or interrupted by switching on/off the continuous wave laser.To demonstrate the feasibility and investigate the controllable combustion behaviors under different laser on/off conditions,the combus-tion parameters including burning rate,ignition delay time and platform pressure were tested using pressure sensor,high-speed camera and thermographic camera.The results showed that the increase of laser-on or laser-off duration both will lead to the decrease of propellant combustion performance during re-ignition and re-combustion process.This is mainly attributed to the laser attenuation caused by the accumulation of combustion residue and the change of chamber ambient temperature.Simultaneously,the multiple ignition tests revealed that the increased chamber ambient temperature after combustion can make up for the energy loss of laser attenuation and expansion of chamber cavity.However,the laser-controlled combustion performance of solid propellant displayed a decrease trend with the addi-tion of ignition times.Nevertheless,the results still exhibited good laser-controlled agility of laser-controlled solid propellant and manifested its inspiring potential in many aspects of space missions.     

Formulation development and characterization of cellulose acetate nitrate based propellants for improved insensitive munitions properties

Cellulose acetate nitrate (CAN) was used as an insensitive energetic binder to improve the insensitive munitions (IM) properties of gun propellants to replace the M1 propellant used in 105 mm artillery charges. CAN contains the energetic nitro groups found in nitrocellulose (NC), but also acetyl functionalities, which lowered the polymer's sensitivity to heat and shock, and therefore improved its IM properties relative to NC. The formulation, development and small-scale characterization testing of several CAN-based propellants were done. The formulations, using insensitive energetic solid fillers and high-nitrogen modifiers in place of nitramine were completed. The small scale characterization testing, such as closed bomb testing, small scale sensitivity, thermal stability, and chemical compatibility were done. The mechanical response of the propellants under high-rate uni-axial compression at, hot, cold, and ambient temperatures were also completed. Critical diameter testing, hot fragment conductive ignition (HFCI) tests were done to evaluate the propellants' responses to thermal and shock stimuli. Utilizing the propellant chemical composition, theoretical predictions of erosivity were completed. All the small scale test results were utilized to down-select the promising CAN based formulations for large scale demonstration testing such as the ballistic performance and fragment impact testing in the 105 mm M67 artillery charge configurations. The test results completed in the small and large scale testing are discussed.     

先进的低特征信号推进剂研制

为了进一步提高导弹的突防能力和生存能力 ,扼要概括了国外战术导弹用低特征信号推进剂的现状 ;重点介绍了航天系统研制的几种不同能量梯次的低特征信号推进剂     

弹药长期贮存后发射药剩余能量的计算

对弹药在长期贮存过程中其发射药剩余能量的变化情况进行了研究。首先建立了箱装弹药中发射药放热规律的数学模型 ,然后利用数值模拟的方法计算了其在贮存过程中的剩余能量 ,最后对计算结果进行了分析与讨论     

NEPE类推进剂燃烧模拟

在分析、研究硝胺和AP CMDB推进剂燃烧模型的基础上,结合NEPE类推进剂的配方和燃烧性能特点,建立了NEPE类推进剂燃烧的物理模型,并进行了燃速和压强指数的理论计算。结果表明,几乎100%的计算结果都在实验值的±10%范围内。这说明所建立的模型基本合理,编制的NEPE类推进剂燃速计算程序基本可行。